logo
SIGN UP

"Unlock Your Potential with the Advanced Well Control & Drilling Membership: From Confusion to Confidence"

"Elevate Your Career with Expert Training Tailored for Senior Drilling Professionals.

Join Today and Lead the Industry Tomorrow!"

By Ajay Verma

REGISTER NOW

The most common problems  that all crew faces is a lack of confidence and fear of failure.

Problems

Stuck at one position and unsure how to proceed ?
IWCF or IADC certification is very expensive and must to continue the job but lack of well control knowledge and no one to guide is frustrating.

Drilling problems like stuckpipe and unplaned operation is common and lack of awareness of the drilling problem puts your job in risk

Don’t worry we got you covered, Launching Advance well control and drilling membership program. 

Conquer Drilling Challenges with Confidence: Our specially curated programs equip you to handle any situation. We cover critical topics like well control, stuck pipe prevention, kill sheet preparation, API drilling guidelines, and essential safety protocols.  This comprehensive training empowers you to face challenges with confidence and ensures you're prepared for real-world drilling scenarios.

Industry-Leading Certification: We will prepare you to Earn certifications recognized globally, validating your expertise and enhancing your career prospects in the oil and gas industry.

Innovative E-Learning Experience: Experience innovative and engaging learning modules designed to make complex concepts more accessible and understandable.

Personalized Learning Pathways: Tailor your learning journey to suit your individual needs and career goals with our flexible and customizable course offerings.

Stay up-to-date with the latest industry trends and advancements through regular updates and additions to our course catalog.

Join a vibrant community of industry professionals, share insights, and collaborate on real-world challenges to further enhance your skills and knowledge.

Invest in Your Future: Invest in your future success and career advancement by joining the Advanced Well Control & Drilling Club today. Unlock your full potential and become a leader in the oil and gas industry.

UPGRADE NOW

Who Should Enroll?

Senior Crew Petroleum Engg. AD

Drillers

Toolpusher

Drilling Engneer

Company Man

Drilling Supervisor.

REGISTER NOW

Here is the Solution to you
Well Control learning Problem

Well Control
Course in now on demand and Available to you Anytime, Anywhere.

UPGRADE NOW

Key Features of  "Advanced Well Control & Drilling with Mr. Ajay Verma"  Membership :

Comprehensive Course Bundle:

Gain access to an extensive range of courses covering critical topics such as well control principles, Stuckpipe prevention techniques, Complecated drilling problem solutions, Programes on API Guide lines on drilling eqipments and safety protocols.

Expertly Curated Content:

Each course in our bundle is carefully curated to provide in-depth knowledge and enhance practical skills essential for senior drilling crew members.

Innovative E-Learning Experience:

Experience innovative and engaging learning modules designed to make complex concepts more accessible and understandable.

Personalized Learning Pathways:

Tailor your learning journey to suit your individual needs and career goals with our flexible and customizable course offerings.

Access Anytime, Anywhere:

Enjoy the flexibility of learning at your own pace and convenience, with 24/7 access to our online platform from anywhere in the world.

Community and Collaboration:

Join a vibrant community of industry professionals, share insights, and collaborate on real-world challenges to further enhance your skills and knowledge.

Dedicated Support:

Receive personalized support and guidance from our team of experts to ensure a seamless and enriching learning experience.

Invest in Your Future:

Invest in your future success and career advancement by joining the Advanced Well Control & Drilling Club today. Unlock your full potential and become a leader in the oil and gas industry.

ENROLL NOW

Your Roadmap to AWCDM Success Begins Here!

Know Your 

Instructor

Know Your 

Instructor

Know Your

Ajay Verma

Director @ Rig World Multi Services Pvt. Ltd.
| Founder @ e-RIGWORLD

Instructor

Empowering professionals in the oil and gas industry through a global e Learning platform is my passion & commitment. As a recognized leader, I strive for equal access to high quality education, particularly in Drilling, Well-Control, and well intervention.

Professional Journey : With over 23 years of experience in Drilling, Well Control, and Workover Operations across the Asian subcontinent, my teaching expertise spans Well Control, Fishing, Drilling, Well Intervention, Stuck Pipe Prevention and Complication Strategies for over 14 years. Having worked at ONGC and served as a Senior Drilling /Workover  Supervisor with Cairn India Ltd., I had the privilege of completing the high-profile Oilex Limited well 77H—a multistage frac well for tight gas-in the Cambay Basin.

Innovative E-Learning Creator : With a constant focus on making education more engaging and accessible, I am the creator of eRIGWORLD, one of the most unique global e Llearning platforms for the oil and gas industry.

TESTIMONIALS

Shailendra Jha

Excellent material, way of explanation and all the quiz. The courses has been designed in such a manner that it becomes understandable to visualize and imagine the well control issues which may help in not only controlling the well but also able to explain it properly and efficiently.

Yogesh Bodar

I found this software excellent for all level of candidates, from beginner to supervisor. You will clear your all doubts on Well Control once you go through all the Videos and Assessments provided by this platform. Thank You so much to Rig World to develop this kind of software.

Paul Prasanna Kanth Sripathi

The way of course designed and duration of course are very nice. Explanation of topics is good. The way of interacting and communication with candidate is very good...

Hiren

The class has increased well control fundamentals with excellent teaching technique by Ajay Sir. My expectation for learning well control is now more cleared after attending the course Practice & given assignment is very helpful to evaluate & correct the fundamental.

 
ENROLL NOW

Customer Success Stories

75
+

Number of Courses

50
+

Number of Clients

10000
+

Number of Certifications

3000
+

Training Hours

10
+

Global Accreditations

Courses Included in the Package.

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Mastering IWCF Well Control in 7 Days with Mr. Ajay Verma (Supervisor Level 4)

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Mastering IWCF Well Control in 7 Days with Mr. Ajay Verma (Driller Level 3)

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

IADC Well Sharp Supervisor Level 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Stuck Pipe Prevention 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Well Testing 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Subsea Kill Sheet Module 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Fundamental of Well Control and Pressure Management 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Basic Fire Safety Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Basic First-Aid Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

IADC Rig Pass 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Working At Height & Fall Protection Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Rigging & Slinging 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Permit To Work Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Material safety Data Sheet (MSDS) Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Lockout - Tagout (LOTO) Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Confined space Entry Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Hydrogen Sulfide (H2S) Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Electrical Safety Training 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Life On Rig or Platform 

Day - 01 : Wellbore Pressure Concept

Section : 1  Hydrostatic Pressure Concept

Section : 2 Causes of Kick

Section : 3 Bottom Hole Pressure (BHP)

Section : 4 Tripping Practices

Section : 5 Formation Pressure

Section : 6 Circulating Pressure

Section : 7 Barrier Concept

Section : 8 Useful Material

Day - 02 : Kick Indication & Shut-In Procedure

Section : 1  Leak Off Test (LOT & FIT)

Section : 2  Kick Warning Sign & Kick Positive Sign

Section : 3  Top Hole Drilling

Section : 4  Shut-In Procedure

Section : 5  Rig Calculation

Section : 6  Loss Control Procedure

Section : 7  Useful Material

Day - 03 : Shut-in Pressure Concept

Section : 1  SCR Concept

Section : 2  Shut-In Pressure Interpretation

Section : 3  Gas Migration and Control Procedure

Section : 4  WBM & OBM

Section : 5  Hydrate

Section : 6  Useful Material

Day - 04 : Well Killing Methods

Section : 1  Well Killing Methods

Section : 2  Comparison Between Driller's Method and Wait & Weight Method

Section : 3  Well Killing Problems

Section : 4  BHP During Well Killing

Section : 5  Well Control Calculation

Section : 6  Useful Material

Day - 05 : Well Control Equipment & Testing

Section : 1  BOP Configuration

Section : 2  RAM Blowout Preventer

Section : 3  Annular Blowout Preventer & Diverter

Section : 4  Associated Well Control Equipment's

Section : 5  BOP Testing

Section : 6  Useful Material

Day - 06 : Accumulator & MGS Working Principle

Section : 1  Mud Gas Separator & Degasser

Section : 2  Accumulator System

Section : 3  Useful Material

Day - 07 : Mock Test

Section : 1  Supervisor Level

Section : 2  Driller Level

Kill Sheet Learning Module

Kill Sheet 1

Kill Sheet 2

Kill Sheet 3

Kill Sheet 4

Kill Sheet 5

Kill Sheet 6

Kill Sheet 7

Pre-Solved Kill Sheet & Gauge Problem

Introduction of Gauge Problems

Gauge Problem : 1

Gauge Problem : 2

Gauge Problem : 3

Gauge Problem : 4

Gauge Problem : 5

Pre-Solved Kill Sheet & Gauge Problem 

Kill Sheet Learning Module (English Version) 

IWCF Well Killing Methods 

IWCF Well Control Principle and Procedure 

IWCF Well Control Equipment 

Stuck Due to Hole Pack up 

Stuck Due to Well Bore Geometry 

Differential Sticking 

IADC Well Sharp Supervisor Level 

BHP Concept and Calculation 

Well Testing 

Sub Sea Kill Sheet Module 

Stuck Pipe Prevention 

Fundamental of Well Control and Pressure Management 

Basic Fire Safety Training 

Basic First-Aid Training 

IADC Rig Pass 

Working At Height & Fall Protection Training 

Rigging & Slinging 

Permit To Work Training 

Material safety Data Sheet (MSDS) Training 

Lockout - Tagout (LOTO) Training 

Confined space Entry Training 

Hydrogen Sulfide (H2S) Training 

Electrical Safety Training 

Hydrostatic Pressure & Calculation - English 

Life On Rig or Platform 

ENROLL NOW

Accreditations

FAQ

1. Are these the right courses for me?

These courses are designed for individuals at all levels of experience in the Oil and Gas industry, whether they are technical experts or already working in the industry. The courses include prerequisite material sections that provide core knowledge of safety, drilling, and an animated overview of advanced topics.

2. How long do I have access to the course?

How does lifetime access sound? After enrolling, you have 1 year access to this course for as long as you like across any and all devices you own.

3. What if I am unhappy with the course?

We always strive for your satisfaction! If you are unhappy with your purchase, please reach out to us to let us know how we can improve our courses. You are eligible for a refund within 7 days of purchase. Visit this page for more information: https://www.erigworld.com/refund-policy

4. Will I get a certificate?

After successful completion of the course and achievement of a passing grade on the final test, you are eligible for a certificate upon paying a fee of 250 Rs. per course. You will receive a Rig World Certificate.

5. I finished all the course materials, but it is saying I can't take the Final Exam. Why?

Typically, this means that you haven't finished all the materials or have missed a section. You can check the status of your course materials by clicking on the Curriculum. If all the quizzes are marked at 100% and all the chapter videos are checked off as complete, you should be able to take the Exam. If you are still having issues, get in touch with us and we will get it figured out for you.

All Rights Reserved By @e-RIGWORLD

Contact Us

Full Name*
Mobile No.*
  • Andorra(+376)
  • United Arab Emirates(+971)
  • Afghanistan(+93)
  • Antigua & Barbuda(+1 268)
  • Anguilla(+1 264)
  • Albania(+355)
  • Armenia(+374)
  • Angola(+244)
  • Antarctica(+8)
  • Argentina(+54)
  • Samoa (American)(+1 684)
  • Austria(+43)
  • Australia(+61)
  • Aruba(+297)
  • Åland Islands(+358 18)
  • Azerbaijan(+994)
  • Bosnia & Herzegovina(+387)
  • Barbados(+1 246)
  • Bangladesh(+880)
  • Belgium(+32)
  • Burkina Faso(+226)
  • Bulgaria(+359)
  • Bahrain(+973)
  • Burundi(+257)
  • Benin(+229)
  • St Barthelemy(+590)
  • Bermuda(+1 441)
  • Brunei(+673)
  • Bolivia(+591)
  • Caribbean NL(+599)
  • Brazil(+55)
  • Bahamas(+1 242)
  • Bhutan(+975)
  • Botswana(+267)
  • Belarus(+375)
  • Belize(+501)
  • Canada(+1)
  • Cocos (Keeling) Islands(+61)
  • Congo (Dem. Rep.)(+243)
  • Central African Rep.(+236)
  • Congo (Rep.)(+242)
  • Switzerland(+41)
  • Côte d'Ivoire(+225)
  • Cook Islands(+682)
  • Chile(+56)
  • Cameroon(+237)
  • China(+86)
  • Colombia(+57)
  • Costa Rica(+506)
  • Cuba(+53)
  • Cape Verde(+238)
  • Curaçao(+599)
  • Christmas Island(+61)
  • Cyprus(+357)
  • Czech Republic(+420)
  • Germany(+49)
  • Djibouti(+253)
  • Denmark(+45)
  • Dominica(+1 767)
  • Dominican Republic(+1 809)
  • Algeria(+213)
  • Ecuador(+593)
  • Estonia(+372)
  • Egypt(+20)
  • Western Sahara(+212)
  • Eritrea(+291)
  • Spain(+34)
  • Ethiopia(+251)
  • Finland(+358)
  • Fiji(+679)
  • Falkland Islands(+500)
  • Micronesia(+691)
  • Faroe Islands(+298)
  • France(+33)
  • Gabon(+241)
  • Britain (UK)(+44)
  • Grenada(+1 473)
  • Georgia(+995)
  • French Guiana(+594)
  • Guernsey(+44 1481)
  • Ghana(+233)
  • Gibraltar(+350)
  • Greenland(+299)
  • Gambia(+220)
  • Guinea(+224)
  • Guadeloupe(+590)
  • Equatorial Guinea(+240)
  • Greece(+30)
  • South Georgia & the South Sandwich Islands(+99)
  • Guatemala(+502)
  • Guam(+1 671)
  • Guinea-Bissau(+245)
  • Guyana(+592)
  • Hong Kong(+852)
  • Honduras(+504)
  • Croatia(+385)
  • Haiti(+509)
  • Hungary(+36)
  • Indonesia(+62)
  • Ireland(+353)
  • Israel(+972)
  • Isle of Man(+44 1624)
  • India(+91)
  • British Indian Ocean Territory(+246)
  • Iraq(+964)
  • Iran(+98)
  • Iceland(+354)
  • Italy(+39)
  • Jersey(+44 1534)
  • Jamaica(+1 876)
  • Jordan(+962)
  • Japan(+81)
  • Kenya(+254)
  • Kyrgyzstan(+996)
  • Cambodia(+855)
  • Kiribati(+686)
  • Comoros(+269)
  • St Kitts & Nevis(+1 869)
  • Korea (North)(+850)
  • Korea (South)(+82)
  • Kuwait(+965)
  • Cayman Islands(+1 345)
  • Kazakhstan(+7)
  • Laos(+856)
  • Lebanon(+961)
  • St Lucia(+1 758)
  • Liechtenstein(+423)
  • Sri Lanka(+94)
  • Liberia(+231)
  • Lesotho(+266)
  • Lithuania(+370)
  • Luxembourg(+352)
  • Latvia(+371)
  • Libya(+218)
  • Morocco(+212)
  • Monaco(+377)
  • Moldova(+373)
  • Montenegro(+382)
  • St Martin (French)(+590)
  • Madagascar(+261)
  • Marshall Islands(+692)
  • North Macedonia(+389)
  • Mali(+223)
  • Myanmar (Burma)(+95)
  • Mongolia(+976)
  • Macau(+853)
  • Northern Mariana Islands(+ 1 670)
  • Martinique(+596)
  • Mauritania(+222)
  • Montserrat(+1 664)
  • Malta(+356)
  • Mauritius(+230)
  • Maldives(+960)
  • Malawi(+265)
  • Mexico(+52)
  • Malaysia(+60)
  • Mozambique(+258)
  • Namibia(+264)
  • New Caledonia(+687)
  • Niger(+227)
  • Norfolk Island(+672)
  • Nigeria(+234)
  • Nicaragua(+505)
  • Netherlands(+31)
  • Norway(+47)
  • Nepal(+977)
  • Nauru(+674)
  • Niue(+683)
  • New Zealand(+64)
  • Oman(+968)
  • Panama(+507)
  • Peru(+51)
  • French Polynesia(+689)
  • Papua New Guinea(+675)
  • Philippines(+63)
  • Pakistan(+92)
  • Poland(+48)
  • St Pierre & Miquelon(+508)
  • Pitcairn(+870)
  • Puerto Rico(+1 787)
  • Palestine(+970)
  • Portugal(+351)
  • Palau(+680)
  • Paraguay(+595)
  • Qatar(+974)
  • Réunion(+262)
  • Romania(+40)
  • Serbia(+381)
  • Russia(+7)
  • Rwanda(+250)
  • Saudi Arabia(+966)
  • Solomon Islands(+677)
  • Seychelles(+248)
  • Sudan(+249)
  • Sweden(+46)
  • Singapore(+65)
  • St Helena(+290)
  • Slovenia(+386)
  • Svalbard & Jan Mayen(+47)
  • Slovakia(+421)
  • Sierra Leone(+232)
  • San Marino(+378)
  • Senegal(+221)
  • Somalia(+252)
  • Suriname(+597)
  • South Sudan(+211)
  • Sao Tome & Principe(+239)
  • El Salvador(+503)
  • St Maarten (Dutch)(+599)
  • Syria(+963)
  • Eswatini (Swaziland)(+268)
  • Turks & Caicos Is(+1 649)
  • Chad(+235)
  • French Southern Territories(+99)
  • Togo(+228)
  • Thailand(+66)
  • Tajikistan(+992)
  • Tokelau(+690)
  • East Timor(+670)
  • Turkmenistan(+993)
  • Tunisia(+216)
  • Tonga(+676)
  • Turkey(+90)
  • Trinidad & Tobago(+1 868)
  • Tuvalu(+688)
  • Taiwan(+886)
  • Tanzania(+255)
  • Ukraine(+380)
  • Uganda(+256)
  • US minor outlying islands(+1)
  • United States(+1)
  • Uruguay(+598)
  • Uzbekistan(+998)
  • Vatican City(+379)
  • St Vincent(+1 784)
  • Venezuela(+58)
  • Virgin Islands (UK)(+1 284)
  • Virgin Islands (US)(+1 340)
  • Vietnam(+84)
  • Vanuatu(+678)
  • Wallis & Futuna(+681)
  • Samoa (western)(+685)
  • Yemen(+967)
  • Mayotte(+262)
  • South Africa(+27)
  • Zambia(+260)
  • Zimbabwe(+263)
Company Name
Position*
Message
Please fill all the required fields!
Please accept terms and conditions to proceed
Please wait